Want to Make a Solar Panel?
Every day, alternative energy sources make the headlines. You can only read the newspaper or watch news shows, at some point not bumping into products and advances made to reduce reliance on foreign oil and improve the environment. You may want to participate in this new green world ecology as well. Sunny is one of the infinite source of energy, looked at as a source of energy. Generally, to use the energy you need panels or combinations of solar cells to collect the sun's rays and then the method of transforming the electricity for power. You can buy a solar panel or make them directly.
The construction of the solar panel can be divided into ten stages, which is again based on what are your needs, quantum of solar energy, would you like to be produced and the number of solar panel, you would like to strongly on the building.
You know how you may have to invest to build your own solar panel? It is possible to build one that would radically reduce your consumption of electricity to charge less than $ 200 if you do your job perfectly.
Some people who build the solar panel combine them with their service grid electricity company to add a manufactured home and reduce power bills. Others want to completely decouple from the grid as a whole and make 100% of electricity needs of homes. To completely disconnect, you will probably need at least 4-5 solar panels with high exposure to the sun to produce sufficient power.
Here are 10 steps, you must create your own solar panel:
Phase 1: Evaluate your requirement of a government and as well as the number of panels in which it would need for the same. Statistics show that the average daily domestic demand in the U.S. varies between 10 000 watts to 30 000 watts. Your consumption is based on the number of electrical and electronic devices that you use every day. If you have some kind of difficulty, you can check out my electricity bill to estimate your monthly energy consumption. Traditional solar cell produces about 2 watts of power, which continues to prove that you should be able to manage to approximately 5 000 - 15 000 individual solar cells to confirm the full power to your home, which in turn would necessitate approximately 5-15 separate solar panel and this. In case you did not foresee the hope entirely on solar energy for your home needs, and you strongly wish only to reduce their service charges in half, you can achieve this and still build your DIY solar panels, which would certainly pay dividends in the future for the fact that you spent time and energy.
Phase 2: Immediately after you calculate the number of solar cells required to work; buy them on e-Bay, referring chopped into pieces or broken solar cells on the search engine. They happen, financially viable to be as effective as any new cells. You can buy solar cells from stores in your area as well, however, providing those on e-Bay would be the best solution.
Step 3: Once you have the basic cell as a central part of your solar panel, you can buy or collect other materials needed to complete the project. The following list defines what you should get to build a solar panel: 1. Thin plywood (local hardware store) 2. Flexi-glass about 0.5 inches thick (hardware store). 3. Tin-coated wire. 4. Silicon (in order to seal the hole). 5. Soldering iron (in order to connect the cell). 6. Handle the flow of resin (in order to connect your cell). 7. ULTRA Defender (to avoid damaging your new solar panel). 8. Voltmeter. If you have your cell in his hand, and gathered all the additional materials, you can start to build its first solar panel.
Phase 4: In the beginning, prepare plywood, sawing it to correct the measurement to fix it and make sure that all the cells that you bought, have been carefully adapted to this. Then, apply the appropriate coating ULTRA-counsel on the forest to save it from the harsh rays of the sun.
Phase 5: Then, you are obliged to provide solar cells uniformly in a row. This may not be an easy job, and not easy to explain them here, however, the primary methods: Determine the location of all cells behind the account and place a small amount of soldering iron on each of them. You should then connect all the cells to the wire tabbing, in this manner, which is the voice of one cell should be associated with the back of another cell, to ensure completion of the cycle until you have tied up all the cells in a similar manner.
Stage 6: Then, you must attach all the rows of cells at the end of your sheets of plywood with silicone. In addition, you need to have made the wires to each row of cells and make a hole behind your plywood to allow you to have the wiring to the battery cells, or any other equipment storage power.
Phase 7: Install the flexi-glass to the edges of your sheet of plywood and cover the cell, respectively, using silicone again.
Stage 8: Cover any gaping gaps or holes (around openings through which your positive wires and cables are negatives or in any other place) with silicone.
Step 9: Using the exercise again, create an extra hole at the base of the plywood as a respite, to reduce and prevent humidity, growing in the solar panel.
Stage 10: Then, join the electric wire from the panel to a panel collector - who in turn connect to your manager and then to charge your battery. Do not forget to seek the advice of his neighbor out of hardware, when you do this, make sure that you have the correct W and amps for your wiring, because they are fully knowledgeable in this aspect, to guide you after watching your equipment.
This is all done, "to check the work, just put your cell to the sun, connect a voltmeter, and you'll be amazed to see the power that makes your new solar panel.